System requirements
The watch supports Android 4.4, iOS 8.0, Bluetooth 4.0 and above.
How to charge battery
Before start using the smart watch, please make sure the battery is
charged. For charging, please use the provided magnet charging
cable. The recommended power adaptor current is 5V, 1A.
It takes about 3 hours to fully charge the smart watch, please follow the
steps below to charge.
-
Put the charging cable beneath the watch
-
Make sure the POGO pins on the cable fit correctly onto the
charging terminals on the back of the watch.
-
If correctly placed, the pins will stick to the charging terminals on the
back of the watch.
-
Then connect the charging cable to the power source with the USB
connector.
Environment
Please don’t wear the smart watch when taking a hot shower or bath.
Don’t use the watch in very high and low temperature environment.
Otherwise, it may damage the watch.
Basic operation
-
Turn on: long press the power button for 3 seconds.
-
Access sport modes: swipe from right to left on the watch face, or
press the top key.