Maintainance guide – Electric scooters
2,5-3,5 bar / 35-45 PSI is considered as a reference value regarding the tire pressuere dependent
on personal driving comfort preferences.
If the wheel seems wobbly even after screws are tightened, the bearings might be
worn down and need replacement
PICTURE IS ONLY AN EXAMPLE
●
Please make sure to check that the steering system is correctly adjusted and that
all connection components are firmly secured and not broken before riding, refer
to handle assembly and safety instruction.
●
Please read operation guide and warnings of correct techniques for use and
braking
●
Always wear shoes.
●
We highly recommend to always wear helmet/pads for your own protection.
●
Self-locking nuts and other self- locking fixings may lose their effectiveness.
●
All parts and materials of electric scooter cannot be changed, modifications of the
scooter are not allowed. If done, then warranty is void.
Storage and cleaning
If your Electric scooter gets dirty, please clean it with a damp cloth only, you may not use
pressured water-gun or running water, as this could damage vital parts. It is also possible to use
a little toothpaste if the dirt is stuck. Remember to clean with damp cloth after this.
Please make sure to keep the electric scooter turned off while cleaning it, and make sure to
cover the charging input to avoid problems with the electronics.
Make sure to dry the scooter with a towel, should it become wet.
Please notice
: Do not use alcohol, gas, kerosene or other corrosive and volatile chemical
solvents. This can damage both the appearance and the internal structure of the electric
scooter.
Please store your Electric scooter in a dry and cool environment when not in use. Avoid
leaving it outdoors, as it is not made for use in wet areas. Nor is it good to expose to high
WARNING
