9
Avoid applying too much force or stepping on the rear fender permanently. This may cause the fender
to loosen or damage the spring holding the fender.
As a result, the brake pad constantly touches the wheel and the motor temperature increases due to the
additional resistance. The rear tire can also get loose if the brake is in constant braking position.
Avoid constant braking. As a result, the tires will not only wear off, but also become hot. This will soften
the rubber and it will no longer have the same grip on the road as usual. Do not touch the tire after
braking.
If you hear unusual noises or notice friction when switching on the electric scooter, a bearing may be
damaged. A worn bearing may even be indicated by strong vibration of the handlebar. In this case,
please contact your retailer since the bearing needs to be replaced and/or the handlebar checked and
adjusted.
Ride the electric scooter only on a dry surface since otherwise the riding safety and braking performance
may be impaired and the motor or bearings may be damaged.
Please do not ride up or down long and steep slopes.
Stop riding when you receive the "Low Battery Warning". The electric scooter then moves only slowly
and does not have the same traction as normal and the electric brake does not work. In this case, please
use the rear brake to stop the electric scooter. Get off the Electric scooter as soon as the speed allows to
do that safely.
Do not use the electric brake and the throttle at the same time.
A normally working Electric scooter operates safely and quietly. If you hear noises or notice bumpy
operation, please check wheels, bearings, and brakes. Contact your customer service for repair and
maintenance, if necessary.
7
Maintenance
●
Storage and cleaning
If your Electric scooter gets dirty, please clean it with a damp cloth. (you can use a stiff brush first to get
the worst dirt off and then use a cloth afterwards to clean it.). It is also possible to use a little
toothpaste if the dirt is stuck. Remember to clean with damp cloth after this.
Please make sure to keep the electric scooter turned off while cleaning it, and make sure to cover the
charging input to avoid problems with the electronics.
Please notice
: Do not use alcohol, gas, kerosene or other corrosive and volatile chemical solvents. This
can damage both the appearance and the internal structure of the electric scooter. You may not use
pressured water-gun or running water either.
Please store your Electric scooter in a dry and cool environment when not in use. Avoid leaving it
outdoors, as it is not made for use in wet areas. Nor is it good to expose to high temperatures
caused by direct sun for a long time.
●
Maintenance of batteries
Please make sure the batteries do not get over 50° Celsius, or minus 10° Celsius for a longer period of
time. (e.g don’t leave the electric scooter in a hot car in summer, do not put batteries into fire etc.) Low
temperature (e.g. subzero temperature) can damage the battery cells.
