Denver SCO-80130, Руководство пользователя

Страница: 13 / 25

Change the gear: Short press or button to change the gear level (Gear 3 is fast speed, Gear 2 is
▲ ▼
medium speed, and Gear 1 is slow speed).
Acceleration: Gently press the accelerator button to speed up (The depth of the press is related to the
gear level you have set).
Deceleration: Gently press the deceleration dial to slow down. The deeper the press, the greater the
deceleration (the deceleration is relevant to the formation of the press, and pushing too hard can not
increase the braking force and may cause damage to the brake dial).
Clear total mileage: Press and buttons at the same time, then press the power button
▲ ▼
to switch
on the Electric scooter, and the total mileage will be cleared.
Important: Press and buttons at the same time, then press the power button
▲ ▼
and select P3
mode, when parameter value is 0, it will start with zero. When parameter value is 1, it will start with
non-zero.
(Zero start: When starting, the Electric scooter in a stationary case, press the accelerator to start driving.)
(Non-zero start: When starting, the Electric scooter is static, press the accelerator and the Electric
scooter does not work, push the Electric scooter manually to start driving, the Electric scooter works.
factory default is non-zero start. )
You have to manually move the Electric scooter with your foot before the accelerator button works.
8 Electric scooter riding
Rear brake
1. Press and buttons to adjust speed level.
▲ ▼
2. Press the accelerator button to accelerate, so you can drive.
3. Press the brake button to brake.
4. When you press the accelerator and electric brake button at the same time, the Electric scooter will
automatically brake
5. For safety, the rear wheel brake system must be used when driving at high speed.
6. When driving at night, press the headlight switch button to turn on the headlight.
8.1
8.1 Front and Back LED Light