Denver SCO-65210, Оригинальная инструкция

Страница: 15 / 26

15
deceleration (the deceleration is relevant to the formation of the press, and pushing too hard can not
increase the braking force and may cause damage to the brake dial).
Total mileage clearance: press
▲
and
▼
buttons at the same time , then press the power button
to switch on the E-scooter, and the total mileage will be cleared.
Important: Press
▲
and
▼
buttons at the same time,then press the power button and select P3 mode,
when parameter value is 0, it will start with zero. When parameter value is 1, it will start with non-zero.
(Zero start: When starting, the E-scooter in a stationary case, press the accelerator to start driving.)
(Non-zero start: When starting, the scooter is static, press the accelerator and the E-scooter does not
work, push the e-scooter manually to start driving , the E-scooter works. factory default is non-zero
start. )
You have to manually move the E-scooter with your foot before the accelerator handle are working.
9. Operation Guide
Headlight Switch
Rear Brake