【
Scenery Observation
】
●
Take the objective cover down, observing the
screen from eyecup#11.
1.
Adjust the diopter ring #10 until to get the sharp
images
2.
Adjust the objective focusing wheel #2 to make the
images to be sharpest and easy to observe then.
●
Automatic
fine-tuning
control
of
display
brightness could be operated by Viewer.
●
Digital zoom could be realized by pressing #13
and #14 ranged at 1x to 8x.
●
If the environment is light enough, turn the
auxiliary light off to save the power. On the
contrary, please turn the auxiliary light on to get
the sharpest image to observe
●
Otherwise, please turn the auxiliary light on.
【
Announcements
】
Don’t block the light resource.
【
Brightness Adjustment
】
l
In the observing mode,
press #16.
l
Enter
the
menu
of
brightness adjustment. Just as the
screen showed, the number after
“Bright”
means
the
current
brightness index.
l
Press #15 to heighten the index and #16 to lower
it. 9 means the highest brightness of display. The index
ranged at 1 to 9, 9 means the brightest index.
【
High Beam Adjustment
】
In the observing mode, press
#16 twice to enter the high beam
adjustment menu.
The screen will be just as the
picture showed.
The index of LAMP shows the
intensity of auxiliary light.
l
Press UP#14, DOWN #15
，
the high beam will be
changed ranged at 0 to 9(9-highest, 0-off).
l
When the high beam function is opened, the menu
is exited, LAMP shows on the screen will be flickered.
【
Announcements
】
On any mode above, the menu will be disappeared
and went back to observing (photo shooting) mode if there
is any operation within 8 seconds.
Please turn the auxiliary light off if you don’t use it
to save the battery.
SD
Br i ght : 7
LAMP 0
*
Operating Instructions
DENVER NVI-500
ENG-9
Operating Instructions
DENVER NVI-500
ENG-10
Operating Instructions
DENVER NVI-500
ENG-11
Operating Instructions
DENVER NVI-500
ENG-12
Brightness Adjustment
High Beam Adjustment
0 3 7 2 7
SD
Br i ght : 7
POWLED 0
LED: OFF
*
