EN-1
LOCATION OF CONTROLS
1)
Dust cover
17) CD tray
2)
LCD display
18) 3.5mm stereo headphone jack
3)
Volume up/down button
19) Remote sensor
4)
Sleep button
20) EQ button
5)
Standby LED indicator
21) Play/Pause
button
6)
High speed dubbing button
22) Timer button
7)
On/standby button
23) Mute button
8)
Stop
/
St-Mo
button
24) CD tray open/close
button
9)
Random button
25) Skip/Tuning up
button
10) Functions button 26) Preset up button
11) Repeat button
27) Cassette door (2)
12) Skip/Tuning down
button
28) Deck (2) control keys
13) Preset down button
29) Spindle adaptor
14) Memory/Clk-adj button
30) Turntable speed selector
15) Cassette door (1)
31) Pick-up holder
16) Deck (1) control keys
32) Speaker wire terminal
Record key
33) Auto stop switch
Playback key
34) FM wire antenna
Rewind key
35) AC line cord
Fast forward key
Stop/eject key
Pause key
Caution:
Usage of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation
exposure.
This unit should not be adjusted or repaired by anyone except qualified service personnel.
Important:
Since movement of the cd mechanism and the sensitive circuitry may cause interference to the radio tuner nearby, switch this unit off
while operating other radio devices.
Due to the complexity of the system, please un-plug the main power supply of the unit if found the unit hang up during
operation!
This is not a malfunction of the system!
Precautions for use
Installation
Unpack all parts and remove protective material.
Do not connect the unit to the mains before checking the main voltage and before all other connections have been made.
Do not cover any vents and make sure that there is a space of several centimeters around the unit for ventilation.
Connection
1.
Connect the AC line cord (35) to AC outlet and connect the speaker wire to the speaker terminal (32) located on the rear side of
unit.
2.
Turn on the unit
by On/Standby button (7) and switch the function button (10) to “ Tuner ” function. If the LCD display (2) light up
with blue backlight, it’s mean the power supply is normal. Now your system is ready to play the music.
Setting the clock
1.
Set unit in standby mode.
2.
Press & hold the “ Mem/Clk-adj ” button (14), the LCD display (2) will show “ 12H ” and flashing. Press skip up
or skip down
button (25,12)
to select the appropriate area hour format(12hr/24hr). Press “Mem/Clk-adj” button (14) again to confirm.
