AUXILIARY (AUX) MODE
1.
Slide the FUNCTION SWITCH to the “AUX” position.
2.
Connect the earphone socket from the Auxiliary unit (e.g. MP3 Player or
MD Player) into AUX-IN-JACK (22) of this product via an Audio Line Cord
(with 3.5mm plug on both ends ; Not supplied).
3.
Play the Auxiliary unit. Music from the Auxiliary unit can be listened
through the Speakers of this product.
REMOTE CONTROL OPERATION
Installing Batteries
Slide open the BATTERY DOOR, install two “AA” size or UM-3 batteries
according to the polarity diagram inside the battery compartment of the
Remote Controller.
Battery Replacement
When batteries become weak, the operating distance of the Remote
Controller is greatly reduced and you will need to replace batteries.
Using The Remote Controller Correctly
•
Point the Remote Controller at the REMOTE SENSOR locates on the main
unit.
•
The function of the button is the same as the corresponding control on
the main unit.
•
When there is a strong ambient light source, the performance of the
infrared REMOTE SENSOR may be degraded causing unreliable operation.
•
The recommended effective distance for remote operation is about 5
meters.
1.
REMOTE SENSOR (40)
2.
POWER BUTTON (41)
a)
While the main unit is in operation, press this POWER BUTTON (41)
once, the unit will go to Standby Mode and POWER/STANDBY LED
INDICATOR (16) will turn from green to red color.
b)
Press the POWER BUTTON (41) again and it will resume to normal
play function.
NOTE :
When the POWER/STANDBY LED INDICATOR (16) is in red color, the unit
is only in Standby Mode. Press the POWER BUTTON (1) locates on the
main unit to turn off the unit completely.
English - 11
