COMPONENTS
ASSEMBLING THE METAL DETECTOR
Assembly is easy and requires no special tools. Just follow the
steps below.
1.
Unscrew the knobs on the search coil and remove the knobs
and the connector. Insert the smaller shaft and align the holes
on the search coil bracket and the shaft. Push the connector
through the holes, then replace and tighten the knobs.
2.
Loosen the shaft’s lock nut (attached to the handle) in the
direction of the arrow. Then insert the smaller shaft into the
larger shaft connected to the handle. Turn the shaft’s lock nut in
the direction opposite to the direction of the arrow to lock it in
place.
Search coil
Adjustable shaft
with cable
Arm rest
Control box
Содержание MET-110
Страница 1: ...MET 110 denver electronics com June 2021 ...