UK-4
LISTENING TO YOUR RADIO
Press
press
TO SET SLEEP FUNCTION (on the remote control)
This function allows you to program the system to switch off itself after a set period of time. You can set your sleep
time in power on mode:
1. T
o activate the sleep function, press the SLEEP button on the remote, the display will show “Sleep Timer-OFF,90,80,
70,60, 50, 40,30,20,10” and flash.
2. When the display shows your desired sleep time, release the button, the sleep timer is now activated. The display will
show “S10” is to indicate “10 minutes” sleep time and so on. When the sleep time counts to zero, the unit will go off.
3. To cancel sleep, press the SLEEP button once again, the sleep function will turn off.
Hints for better reception
This unit carries a single lead wire DAB/FM antenna, to obtain the best performance, you should fully extend the wire
antenna and adjust the position as well as the direction until you find the best reception.
For ideal DAB reception, always maintain the lead wire antenna in a vertical position (holding it upward or downward
behind the unit) is highly recommended.
DAB/DAB+ mode
When the unit is powered up for the first time, it will be in standby mode, and the display will show “Welcome to Digital
Radio”,Press the STANDBY/ON button on the unit (or remote control) to turn the radio on, it will automatically enter
into the DAB/DAB+ mode and perform Autotune Quick scan function.
During scan, the display will show “Searching …” together with a slide bar that
indicates the progress of the scan and
the amount of stations that have been found so far.
Once the scan has finished, the radio will select the first alphanumerically found station. To explore the found stations,
the SKIP/TUNE SEARCH (UP or DOWN) button to your desired station.
DAB/DAB+ Autotune Full scan modes
Full scan will search for all DAB/DAB+ Band III channels. After the scan has finished, the first alphanumerically found
station will be automatically selected.
1. To activate autotune full scan, press and hold the PLAY/PAUSE/SCAN button on the unit (or remote control) to enter
into the “Autotune Full scan” mode, the display will show “Searching...” and a slower progressing slide bar.
2. All the stations that have been found will be stored automatically, to explore the stations that have been found,
the SKIP/TUNE SEARCH ( UP or DOWN) button for selection.
DAB/DAB+ manual tune
1. To select manual tune, press the SELECT/FM MONO/ST. button on the unit (or remote control) to enter into the
“Manual tune” mode.
2. Press the SKIP/TUNE SEARCH (UP or DOWN) button to scroll through the DAB/DAB+ channels, the display will
show “5A to 13F” and their associated frequencies.
3. W
hen your desired frequency appears in the display, press the SELECT/FM MONO/ST. button to confirm. The
name of the station group (ensemble/multiplex) will be displayed.
4. Press the STOP/MENU/INFO button o see what stations are present on the found ensemble/multiplex.
Secondary Services
On some occasions you will see a “>” symbol appeared after the name of the station, this indicates that there are
secondary services available to that station. These secondary services contain extra services that relate to the
primary station. E.g. a sports station may want to add extra commentaries. The secondary services are inserted
directly after the primary station. To select the secondary station, press the SELECT/FM MONO/ST. button on the
remote control when the “>” appears in the display.
FM mode
1. To select FM, press the FUNCTION button on the unit (or remote control), the display will show FM and the
frequency.
2. To activate frequency auto search, press the PLAY/PAUSE/SCAN button once, the frequency band will scan form
down to up; pres and hold the PLAY/PAUSE/SCAN button, the frequency band will scan form up to down; it will stop
automatically once a station has been found.
3. You can also press the SKIP/TUNE SEARCH(UP or DOWN) button on the unit (or remote control) to select your
desired frequency.
4. Press the SELECT/FM MONO/ST. button on the unit (or remote control) to toggle select between the FM “STEREO”
and “MONO” reception.
STORING AND RECALLING STORED PRESET STATIONS
In either DAB or FM mode, you can store up to 20 stations to the favourite presets for FM and 20 stations for DAB; this
will enable you to get direct access to your favourite stations.
1. To store a preset, first tune to your desired station, then press and hold the PRESET/MEMORY button on the remote
control, the display will show frequency and the “#” flash.
2. Press the PRESET ( UP or DOWN) button, until the display will show “ Preset Empty # ” and the “#” flash. to select
your desired station preset number, then press the PRESET/MEMORY button on the remote control to confirm your
selection; the display will show “Preset # stored” in DAB/FM mode.
3. To recall a preset station, press the PRESET/MEMORY button once and then press the PRESET(UP or DOWN) button
to select the stations that you have stored, then press the PRESET/MEMORY button to confirm your selection.
Note: 1. The stored stations will be saved into its memory and power off will not erase it. Storing a new
station into a preset location will erase the previously stored station in that location.
2. Turn on the unit and press and hold the FUNCTION button until the display show” Press SELECT Key to
Reset”, then press the SELECT button to erase all preset memory.
t
