-7-
Alarm Setup
Important!
In order to use the alarm clock function, connect the radio with to mains power supply to enable
standby mode.
When the radio is turned on, press the [
] button to turn the radio to standby mode. Standby
mode is disabled when the radio is using internal battery.
⚫
Choose
Alarm
from the main menu or press the
[Alarm]
button on the remote control.
⚫
Select either Alarm 1 or Alarm 2, choose
Turn on
to activate the alarm.
⚫
Follow the alarm wizard instructions to set the alarm.
⚫
The wizard will guide you through the settings below:
Time
- Set the time for the alarm.
Sound
- You can choose
Wake to Tone, My Favorite
as the alarm source.
Repeat
- You can schedule the alarm as everyday, once or multiple days.
Alarm Volume
- Adjust the volume of the alarm as you like by rotating the
[Dial/Select]
knob.
Alarm duration
- Set the duration of the alarm from 15 to 180 minutes. The radio will be
turned to standby mode when the selected duration of time is due.
⚫
After the above s
ettings are completed, press the [◄] button to exit and make sure the alarm is
turned on. You will see the alarm icon on the display if it is activated.
Stopping the alarm / Activating the snooze function
When the alarm goes off, press the [
] button to stop the alarm or press the
[Select]
dial to activate the
snooze feature.
When snooze is activated, the alarm is muted for 9 minutes and sounds again when the time is due.
You can repeat the process multiple times.
To stop the "Snooze" function, press the [
] button.