Denver IPC-330, Руководство пользователя

Страница: 8 / 17

5. Mail Service Settings and Alarm Service
Settings
1). The Mail service settings are a requirement for the alarm function. If your camera will
be activated it will send you an email with photos attached. For this, you must assure
that the mail service is configured correctly and successfully tested.
Here an example for Gmail.
It will send an email if the camera is activated.
You must enter the following information:
Sender:
Enter your email address
Receiver: Enter your email address or a different email address
SMTP user: Enter the email username
SMTP password: Enter your email password
Note: This function only works if the IP camera is accessed via the network. If you use Gmail,
the port should be configured as 465, SSL should be TLS. The most important, make sure
that your Gmail has SMTP enabled.
It will send you a notification as soon the camera will be activated (depends on the model)
Alarm Service Settings, please use the same settings like in the screenshot below: