8
Operation
Inserting Batteries before using the Remote Control
Insert AAA batteries to the Remote Control to activate it.
Note: The Remote Control works within a range of 6 meters.
Getting Started:
1:
Make sure you have made all the necessary cable connections before connecting the Soundbar to a
wall outlet, when connected to the wall outlet, the soundbar will enter the standby mode and the
power indicator will turn red.
2:
Make sure the subwoofer is connected to the power source and turn the button to
“ON”
3:
Short press
/SOURCE on the unit or
on the Remote Control to turn on the soundbar. The
power indicator will turn white.
4:
Press the Source button on unit or remote control to choose the desired input source.
Note: The Soundbar will enter the standby mode if there is no active input signal for 15 minutes.
Pairing with the subwoofer
The wireless subwoofer automatically connects with the soundbar when both units are powered on. If the
subwoofer is on and connected, the red LED indicator will be on continuously.
Note: For troubleshooting connection problems, refer to the trouble shooting section
Bluetooth Pairing:
1:
Short press the Source button on the Sourndbar and choose the Bluetooth input (voice “Bluetooth”).
2:
The indicator light will be flashing slowly to indicate that it is searching for a Bluetooth device.
3:
Long press the Pair button on the side of the unit. The power indicator will start to flash quickly.
4:
Turn on the Bluetooth function on your smart device and activate Bluetooth device scanning.
5:
Select “SR250G” from the list of found devices.
6:
If necessary, enter the password “0000” and press "OK".
7:
When successfully paired with your device, the indicator light will be on continuously. You can use
the Remote Control to control music playback of the connected Bluetooth device.
(The operation range for the Bluetooth connection is10 meters)
Note:
if a mobile phone you are playing music receives a call, the music will stop playing. When the
call is ended, the devices are connected to each other again and playback will resume.
Removing the connected Bluetooth device
Press and hold the Bluetooth button (3 in below picture) on the soundbar for 3 seconds to disconnect the
connected Bluetooth device.
