Denver DM-75, Руководство по эксплуатации

Страница: 6 / 8

CONNECTION TO AN
EXTERNAL UNIT
Use a commercially available connection cord
which has a 3.5mm stereo plug at one and two
phono plugs at the other end.
connect the stereo plug to the LINE OUT jack
of the unit and connect the phono plugs to the
analog input (AUX) terminals of the external
unit.
NOTE
Turn off the power of both units before
connection. DO NOT connect to the PHONES
inputs of an amplifier (with a built-in phono
equalizer amplifier)
Adjust the volume and BASS BOOST on this
unit.
I
MAINTENANCE
To clean the lens
If the lens become dirty, the player will skip or
not play, If this occurs, clean the lens in the
following. manner, To remove dust or dust
particles, first use a camera lens blower/brush
1 to blow a few times to loosen particles, then
gently brush the lens 2 clean finish by blowing
the lens again.
Note
Take care not to get too much solution on the
swab. which could flow into the unit and cause
damage. Pressing too strongly with the swab
could scratch or break the lens.
To clean the discs
Before playing, wipe the disc from the center
out with a cleaning cloth, After playing, store
the disc in its case.
J
K
5
K
I
LINE IN
CD IN
AUX
R L
LINE OUT
J