English
English
2. With the CH
6
Button select PRESET, then with the VOL
4
Button open the PRESET MENU.
3. Select Manual Tune and press VOL
4
or VOL
3
to start Manual Tuning.
The colour bar will move to the right or left (towards higher or lower channel).
When the station is caught and stored, the scanning operation is stopped.
If you did not receive the desired channel press VOL
4
again.
4. Repeat steps 1-3 to preset another programme number.
MANUAL FINE TUNING
Normally the best picture is obtained automatically. However under unusal conditions
such as weak signal, inadequate antenna system or strong adjacent channel
interference, the Manual Fine Tuning may provide a better picture.
Each channel can be adjusted manually as follows:
1. Select the desired programme number by pressing the Channel
6
/
5
buttons (14) or
using the direct channel select buttons (3) on the Remote control.
2. Press the MENU button (13) on the remote control.
3. With the CH
6
Button select PRESET, then with the VOL
4
Button open the PRESET MENU.
4. Select Manual Fine and press VOL
4
or VOL
3
to start FINE Tuning.
5. Press MENU to exit the MENU screen.
SKIP FUNCTION
When a stored station is not clear or is unwanted, you can skip it when using the CH+/-
buttons.
1. Select the program that is to be skipped with the CH
6
/
5
Buttons or with the numeric keys.
2. Press the MENU button.
2. With the CH
6
Button select PRESET, then with the VOL
4
Button open the PRESET
MENU.
3. Select Channel Jump and press VOL
4
again to ERASE (skip station) or ADDED
(see station)
SWAP FUNCTION
When you want to change the Program number of a stored station, insert in SWAP the
desired new program number.
1. Select the program that is to be swapped with the CH
6
/
5
Buttons or with the
numeric keys.
2. Press the MENU button.
3. With the CH
6
Button select PRESET, then with the VOL
4
Button open the PRESET
MENU.
4. Select Channel Switch and press VOL
4
or VOL
3
to insert new program number.
TIMER FUNCTION
You can switch on and off the unit at a preset time.
1. Press the MENU button (13) on the remote control.
2. With the CH
6
Button select TIMER, then with the VOL
4
Button open the TIMER MENU.
3. With the VOL
3
and VOL
4
Buttons move in the menu options, and adjust with the
Channel
6
/
5
Buttons:
- CLOCK -- --
- OFF TIME -- -- (ON or OFF)
- ON TIME -- -- (ON or OFF)
- ON PROG --
MONITOR OPERATIONS
1. To use the unit as a colour monitor, to see images coming from a VCR or a video-ca-
mera, connect the A/V cable (included) in the A/V IN jack (2) on the side of the unit.
2. Press the POWER button (3) to ON to turn on the unit.
3. Press the TV/AV Button on the unit (9) or the VIDEO Button (7) on the remote control.
4. Press the Volume Controls VOL -/+ (11) on the TV to adjust volume to desired level.
5. To turn Off the unit, press the POWER button (3).
CALENDAR
You can display the calendar by pressing the CALE Button (8) on the remote control.
1. Press the CHANNEL
6
/
5
Buttons to change the year.
2. Press the VOLUME
3
/
4
Buttons to change the month.
3. Press the CALE Button to exit Calendar function.
SLEEP TIMER FUNCTION
You can switch the unit from ON to STANDBY by selecting the switch off time (in minutes):
OFF > 15 > 30 > 45 > 60 > 90 > 120 > 150 > 180
CALL BUTTON (11)
Press the CALL Button (11) on the remote control to display the Program number.
MODE BUTTON (PICTURE CUSTOM SETTINGS)
You can adjust settings for Picture by pressing the MODE button (2) on the Remote Control.
You will cycle between the following settings: STANDARD > MILD > CUSTOM > BRIGHT
RECALL BUTTON (5)
Press this button to return to the previously tuned station.
5
6
