BASIC OPERATION
Setting up
Mains
To run the radio from the main power, follow the instructions below.
1. Connect the DC mains plug to the DC mains input socket on the rear of the unit.
2.
Connect the adapter plug to a mains outlet and switch the radio on
.
Standby & Power off mode
Scanning for DAB stations
Note: As the DAB radio station list is stored in the memory, no station search
takes place the next time you switch on your radio.
Telescopic antenna
The appliance features a telescopic DAB/FM antenna on its back. Pull the antenna
out completely and orient so to achieve the best reception
.
1. Press and hold the Power/Mode button for 1 second to put the system into
Standby mode.
2. To switch it back on, press the Power/Mode button.
1. In DAB mode, press and release the Scan button to carry out a scan. “Scanning”
Storing preset DAB stations
will be displayed, and a progress bar will show the scan progress. The display
also shows the number of stations found during the scan.
Your radio can store up to 20 preset DAB stations to instantly access your
favorite stations.
Note: When storing DAB radio stations as presets, they do not overwrite your
FM station presets.
ENG-3
1. Tune your radio to the DAB station you wish to preset with the Prev. or Next
button and confirm with the Preset button.
2. Press and hold the Preset button on the front of your radio. Preset Store <1:
(Empty)> is displayed and the number is flashing. Or “Empty” if no previous
station has been stored.
3. Use the Prev. or Next button to move to a preset location where you would like
to store the radio station (1-20).
