Denver cat-120, Инструкция по эксплуатации

Страница: 8 / 16

E7
GENERAL OPERATIONS
Turning the unit ON/OFF ( )
Press any button to turn on the unit. To turn off, press and hold “ ” button.
Selecting a source (MODE)
Press MODE repeatedly to switch between TUNER, AUX, SD/MMC and CD/DVD mode.
Loading a Disc
1. Press EJ to open the front panel
2. Insert a disc into the disc loading slot
Ejecting a Disc
Press EJ button to eject disc
Adjusting Volume
• Head Unit: Rotate Head Unit: Rotate VOL knob right or left to increase or decrease volume.
• Remote Control: Press Remote Control: Press VOL+ or VOL- to increase or decrease volume
Mute Button
• Head Unit: Press Head Unit: Press MU button to mute the sound at once. Press again to return to previous volume
level.
• Remote Control: Press Remote Control: Press button.
Loud Button
Press and hold LD button to turn on/off LOUD feature.
Tilt
• Tilt feature allows you to control the viewing angles of the screen. Tilt feature allows you to control the viewing angles of the screen.
• Press Press TILT button repeatedly to choose the desired tilt angle.
Reset
Reset button is placed on the housing. The reset button is to be activated for the following
reason:
• Initial installation of the unit when all wiring is completed.
Initial installation of the unit when all wiring is completed.
• All the function button does not operate. All the function button does not operate.
• Error symbol on the display. Error symbol on the display.
MENU SETTINGS
Note: Press MENU repeatedly to exit the settings or leave it for few seconds and it will automatically
return to normal mode.
AUDIO SETTINGS
1. Press MENU . Select AUDIO and press VOL knob.
2. Rotate VOL knob and select the desired mode listed below:
BASS : -10 - +10
TREBLE : -10 - +10
BALANCE : L - R
FADER : F - R
EQ : OFF, FLAT, CLASSICS, POP, ROCK
3 Rotate the VOL knob until the desired sound is obtained.
Note: Press SEL on the remote control to setup Audio Settings.