3
.
After successful pairing, the speaker will give a beep, and on your phone it will
show that the speaker is connected. If you need to enter a password when pairing,
please enter "0000".
4. After successful connection, Bluetooth devices can play to the speaker. Blue light
will flash slowly when it is in Bluetooth play mode.
How to use AUX input mode.
In any mode, insert 3.5mm to the Bluetooth speaker, and to the audio source you want
to listen to. The Bluetooth speaker will automatically change to AUX input.
How to operate FM radio
Press
M
to enter FM mode. Then long press
to make automatically search for
channels. The blue indicator flashes. When finished, the system will automatically play
the first found station. Short pressor to change stations.
Note: Please insert USB cable for better FM receival. It works as an antenna.
How to charge the speaker
Please charge the speaker before first time use. Plug one part of the USB charge cable
into the speaker Micro USB port, and the other part to a computer USB port or an
external USB adaptor (not included). Charging the battery fully may take up to
8
hours (
first time please extend charging time). When charge is finished the red indicator will
turn off.
How to use mobile NFC
Turn on the “NFC” on the phone (if phone supports NFC function). Put the phone close
to the speaker bottom and scan. The phone will ask: ”connect with BTL-60”. Push “OK”
and the speaker will connect.
FAQ
Cannot connect and play
1) Check Bluetooth settings on your phone or PC. (some pc’s cannot be used for
Bluetooth audio)
2) Check if the speaker are properly charged. If the red indicator flashes when you turn
on the speaker, please charge it.
3) Please turn off , pair the Bluetooth unit again, and try once more.
*If the above doesn’t solve your problems, please contact the store where it is bought.
Bad radio reception
★
Re- search the station at a open place
★
Insert USB cable as external antenna to enhance reception
