CONNECTING & PLAYING MEDIA
Loading and Playing a Disc
1.
Slide the
Open
latch to open the
Disc Door.
2.
Load a disc into the
DVD player,
label side facing up. Close the
Disc Door.
After a disc is
loaded, it will begin playing automatically.
3.
If the disc does not begin playing automatically, press the
Play/Pause
button.
Programming a Loaded Disc
1.
While the loaded disc is playing, press the
PROG
button on the remote control.
2.
Use the
Arrow
buttons to select a program slot.
3.
Use the
Number Keypad
to enter in the chapter and title, or track.
4.
Titles and chapters, or tracks will play in the order they are listed.
5.
Repeat step 3 until the desired titles and chapters, or tracks are programmed.
6.
Use the
Arrow
buttons to highlight the on-screen START button. Press the
OK
button to begin
playing the programmed disc.
Connecting a USB Thumb Drive
AVI, VOB, MPEG 1, MPEG 2 and MPEG 4 video formats are supported.
1.
Connect a
USB thumb drive
to the
USB Port.
2.
Press the
DVD/SD/USB
button to enter
DVD/SD/USB
mode.
3.
Use the
Up/Down Arrow
and
Play
buttons to select
USB mode
and play content from the
connected USB thumb drive.
Connecting a Memory Card
AVI, VOB, MPEG 1, MPEG 2 and MPEG 4 video formats are supported. Note: Formats are not universally
compatible. Playback may be dependent on recording conditions.
1.
Connect a
SD or MMC memory card
to the
Memory Card Port.
2.
Press the
DVD/SD/USB
button to enter
DVD/MCR/USB
mode.
3.
Use the
Up/Down Arrow
and
Play
buttons to select
MCR mode
and play content from the
connected memory card.
Accessing the Setup Menu
To access the Setup Menu, press the
Setup
button on the DVD player or the remote control.
Using the 3.5mm AV Output
Require a 3.5mm to 3x RCA audio/video cable (included).
1.
Connect the
3.5mm to 3x RCA
audio/video cable to the
AV Output
on the unit’s display.
2.
Connect the
3.5mm to 3x RCA
audio/video cable to the
RCA stereo audio inputs
and
composite video input
on a television.
3.
Audio and video played through the portable DVD player will now be seen and heard through the
connected television.
Using the 3.5mm AV Input
Require a 3.5mm to 3 x RCA audio/video cable (included).
1.
Connect the
3.5mm to 3 x RCA audio/video cable
to the
3.5mm AV Input
on the portable DVD
player and the composite video outputs on an audio/video source such, as a television.
2.
Press the
DVD/AV
In
button to switch to
AV In
mode.
3.
Audio and video played from the connected source
（
a television
）
will now be output to the
portable DVD player.
