En
Volume bargraph
DAB SCANNING
RE-SCANNING FOR DAB STATIONS
When first used, your radio scanned the DAB band for available stations .The station
services found were then stored in your system's memory.
You can re-scan the band at any time if you move to a different area or just to refresh the
stored list of available stations.
To scan for DAB stations manually
While playing DAB radio:
•
Press the
Scan
button.
The scanning process will take a few minutes. The number of services found during the
scan will be shown at the right side of the display.
After the scan, the radio will re-tune to the last station playing if it is available. If this station
is not available, the first station in the sequence will play.
Alternatively, you can continue to browse for another station as described in the previous
column.
LISTENING TO FM RADIO
Your radio can also receive FM band radio stations and display RDS data (where
broadcast).
To change to the FM band
•
Press the
Mode
button repeatedly to select FM mode.
To auto-tune to FM stations
•
Press the
Scan
button
briefly
to search up the band for the next station, or
•
Press and
hold
the
Scan
button to search down the band for the next station.
The radio will search and the tuning frequency will be displayed whilst searching.
When a usable station is detected the radio will stop tuning and play the station. If RDS
data is present, the station name and scrolling radio text will be displayed. If RDS data is
not present, the tuned frequency will be displayed
