Denver Electronics DENVER CPR-700, Руководство пользователя

Страница: 3 / 6

Connecting to power
1. Connect the cord of the power adapter to the DC IN jack of the radio.
2. Connect the plug of the power adapter to a wall socket.
The radio is powered and in standby mode when you see the display is switched on.
Backup system
⚫ The radio is equipped with a backup system. It requires a 3 V lithium battery (type:
CR2032).
⚫
If a power cut occurs, the radio automatically switches to battery power and keeps the
clock and timer settings (only backup, it will not show time and alarm).
Setting the clock
In standby mode, press and hold the TIME button to enter the clock setting mode.
•
Setting the tim e : Press the BACK button to set the hours and press the FORWARD
button to set the minutes.
•
Press the TIME button to confirm each setting option.
Listening to radio
1. Press the POWER button to switch the radio on.
2. Press the BACK or FORWARD buttons to adjust the frequency.
3. Press and hold the BACK or FORWARD buttons to automatically tune into the next
available FM station.
4. Press the POWER button to switch the radio off.
** Unroll and extend the antenna to improve FM signal reception.
Setting preset stations
You can store up to 10 preset stations.
1. Tune to a station.
2.
Press and hold the PRESET/M+ button until “P01” (or the next available preset slot)
shows on the display.
3. Press the BACK or FORWARD buttons to select a preset number (P01-P10).
4. Press the PRESET/M+ button to confirm. The preset station has been set.
5. Press the PRESET/M+ button repeatedly while listening to the radio to select a preset
station. Alternatively, press the PRESET/M+ button once and then press the BACK or
FORWARD button to select a preset station.
Using the alarms
Setting alarms
The radio lets you set 2 different alarm. To set the alarms:
1. In standby mode, press and hold the ALARM 1 or ALARM 2 buttons to enter the alarm
time setting mode.
2. In alarm setting mode, press the ALARM 1 or ALARM 2 buttons repeatedly to cycle
through the setting options:
Alarm time > Alarm source
•
Setting alarm time : Press the BACK button to set the hours and press the FORWARD
button to set the minutes.
•
Setting the alarm source : Press the BACK or FORWARD buttons to select alarm or
radio as the alarm source. The corresponding alarm indicator will turn on.