Denver Electronics DAB-47, Инструкция по эксплуатации

Страница: 5 / 64

Use instructions
Power On/off
1. Connect the power adaptor to the DC IN jack at the back of the unit, and connect the other end of
the power adaptor to a mains outlet.
2.
Press the button to turn ON the unit.
3.
Press the DAB/FM button to toggle between DAB and FM modes.
4. To switch to standby mode, press the button again.
Battery power (optional) .
Note : Before installing the batteries (not included), ensure that the unit is unplugged from the mains
outlet.
Open the battery compartment, and insert 4 AA batteries (1.5 V, also known as LR-6) with correct
polarities (+/-) as indicated, then replace the battery compartment until it clicks into place.
DAB radio
Store DAB radio stations automatically
1. Press the DAB/FM button to select DAB mode.
2. When switching to DAB mode for the first time, the unit performs a full scan and store all the available
DAB radio stations.
3. Once the scanning finishes, the unit broadcasts the first alphanumerically found station. Press the TUNING
▲/▼ button to select a DAB radio station, and press the
SELECT button to confirm your selection.
Perform full DAB scan manually
To perform a full scan manually, in DAB mode, press and hold the MENU button to access the menu options,
then press the TUNING ▲/▼ button to select “Full Scan”, and then press the SELECT button to start a full
scan.
Prune DAB radio stations
You can remove the DAB stations from the station list that cannot be received in your area.
A DAB radio station which cannot be received in your area is listed with
a ‘?’ mark before a station name.
1.
In DAB mode, press and hold the MENU button to access the menu options, then press the TUNING
▲/▼ button to select “PRUNE”, and then press the
SELECT button to confirm.
2.
Then “Prune? Yes <No>” is displayed. Press the TUNING ▲/▼ button to select “<Yes>”, then press the
SELECT button to remove the current radio station from the station list.
3