![Dental Kiefer Denta Dampf 1500 AS Скачать руководство пользователя страница 4](http://html.mh-extra.com/html/dental-kiefer/denta-dampf-1500-as/denta-dampf-1500-as_instructions-manual_2483361004.webp)
Allways unplug the device before opening.
Alterations are only allowed after consultation and release of the manufacturer.
In case of nonobservance any guarantee and any liability expires.
Any intervention of non authorised persons will cancel the validy of your
guarantee
Working instructions :
1.To unscrew the safety stopper of the safety valve
– press down and turn anti - clockwise
2.Fill up the tank with about 1,3 l of clean water, use only clean containers and clean funnel.
3.To fasten the safety stopper and the safety valve, press down and turn clockwise
4.Connect the cable to the mains ( 220 / 240 V ) and make sure that the voltage is the same as
mentioned beneath your Denta Dampf 1500 AS
5.Press both switches – both lights will go on. This indicates that the machine is heating. If
the right temperature is reached and the pressure of approximate 4 bars has been reached.
6.Now the machine is ready for use.
7.Pressing the switch on the handpiece – the steam will come out. Never steam to any
electrical machinery or to people.
Never unscrew the safety stopper and safety valve while
Denta Dampf 1500 AS is under pressure.
Never fill up with detergent products or others than clean
water.
To fill up tank again during a cleaning operation proceed as follows :
1. Turn of the heating switch but not the main switch
2. Press the handle switch for complete evacuation of the steam inside the boiler
3. Disconnect the cable
4. Unscrew the safety stopper and the safety valve
5. Wait 2 or 3 minutes and fill up slowly
– use hot water
To ensure the longevity of your Denta Dampf 1500 AS we recommend to descale the boiler at
least once or twice a quarter. Proceed as follows :
1. Fill up 1 l of the tank with water and add a spoon full of descaler ( you`ll find in all
supermarkets)
2. Close the tank and press the switches.
3. Wait about 15 minutes and disconnect the cable.
4. Let the descaler work overnight
5. The next day unscrew the safety stopper and the safety valve , turn the steamer around
and let the water flow out through the top. Then rince twice with cold water.
- 4 -