QUICK INSTALLATION GUIDE FOR THE 19LEDCACI TV
The 19LEDCACI TV starts automatically in Satellite TV modus. If you
want to use terrestrial TV ( DVB-T ) for receipt of for instance
KPN/Digitenne, Then you have to select the DVB-T Modus by using
the SOURCE button on the remote control. Next screen will be
shown:
With the
▼ / ▲
buttons
you can select DTV ( DTV = Digital TV =
DVB-T ) and push the OK button. Next screen will be shown:
Checking Signal strength and – quality and CI Module:
Before you start to download the DVB-T channels we adise you to
check the Signal strength and – quality and the CI Module.
Go with the
▼ / ▲
buttons to Signal Information and push the OK
button. Here you can check the Signal strength and – quality. For
eventual better signal you can adjust or replace the DVB-T antenna.
To check the CI Module for correct inserting in the CI Slot you can use
the
▼ / ▲
buttons to select CI Information and push OK button.. If
you fins here full CI Module information, the CI Module is correctly
inserted in the CI Slot..
Next is to select with the
◄
/
►
buttons DTV and with the
▼ / ▲
and
with the
◄
/
►
,
the country of which you want to view Terrestrial TV and
push the OK button to confirm. The automatically channel search will start
directly and next screen will appear:
During channel download you can see how many DTV (DVB-T) channel are
downloaded and how many of them are TV and Radio channels.
As soon as the channels are downloaded you automatically will return to
Channel Tuning Menu. By pushing the EXIT button you will leave the menu
structure and will come on 1st. TV channel of the channel list.
The Denson 19LEDCACI load the KPN / Digitenne channel list with NED1 on
1 / NED2 on 2 etc…
( refer also to:
http://www.digitenne.nl/digitenne-zenders/
)
KPN /Digitenne Smartcard and CI Module for the Dutch viewers.
For the Belgium viewers many FTA channels available. No smartcard and CI
Module needed.
WE HOPE YOU ENJOY THE DENSON 19LEDCACI TV.
TERRESTRIAL TV ( DVB-T )
KPN/Digitenne TV
For the Digitenne/KPN television you need to insert the KPN smartcard in the KPN CI Module and insert this combination in the CI Slot at the right side of
the TV set. For other encrypted DVB-T channels you have to use the correct smartcard and CI Module of that provider. For receipt of FTA channels only,
you don’t need a smartcard and CI Module. Besides that you will need a DVB-T Antenna ( you can use with or without 5VDC power ) to connect to the
RF IN connector on the right side of the TV set.
To install /download the DVB-T channels ( KPN/Digitenne or FTA )
you push the MENU button and select with the
◄
/
►
buttons
CHANNEL and push OK. You will enter the Channel Sub-Menu.
With the
▼ / ▲
buttons you select AUTO TUNING and push the OK
button.
