Denso RS 31 BHT-1600, Руководство пользователя

Страница: 115 / 159

4.2.4. CONFIGURE PROXY SERVER
A proxy server acts as an intermediary between an endpoint device and another server
from which the device is requesting a service.
To change the proxy settings for a connection:
1) Tap a network in the available Wi-Fi hotspot list.
2) Tap Advanced options.
3)
Tap Proxy and select Manual in the pop-up menu.
4) Enter the address of the proxy server in the Proxy hostname field. Enter the port
number for the proxy server in the Proxy port . Enter the addresses of websites which
are allowed to bypass the proxy server in the Bypass proxy for field. (Use the
separator | between addresses.)
5)
Tap CONNECT .
4.2.5. USE STATIC IP ADDRESS
By default, the device uses DHCP to assign an IP address when connecting to a wireless
network. You may set for the device to connect to a network using a static IP address.
1) Tap a network in the available Wi-Fi hotspot list.
2)
Tap Advanced options
3) Tap IPv4 settings and select Static in the pop-up menu.
4) Enter the IP address, gateway, network prefix length, DNS 1 address and DNS 2
address in the fields provided.
5) Tap CONNECT .
4.2.6. CONNECT WITH WI-FI PROTECTED SETUP (WPS)
Wi-Fi protected setup (WPS) allows easy establishment of a secure wireless network. The
handy terminal supports WPS through push button configuration.
1) On the Wi-Fi hotspot scanning screen, tap More , select Advanced and then
WPS Push Button .
2) A dialog will pop-up on the screen showing the remaining time allowed for pressing
the WPS button on the router.
3) On your wireless router, press the WPS button. The device will connect to your
router.