Denso GT10B-LM, Руководство пользователя, Страница: 24 / 92

15
„
2-point verification read
After registration of master data, the scanner reads a bar code, verifies the bar code data read against the master data
and then becomes ready to register
new master data.
- Switch to the data verification mode.
- Specify the verification parameters
(verification conditions, result output
ways, and verification retry after
mismatch*).
Use the bar-coded parameter menu or configuration software.
The indicator LED lights in green, indicating that the scanner is ready
to register master data.
↓
Scan a master bar code to register.
(Registration of master data)
Press the trigger switch to scan a master bar code.
After registration of master data, the indicator LED goes off.
↓
Scan bar codes.
Use the scanner to scan a target bar code. The scanner verifies the bar
code read against the master data registered and then outputs the
result.
After a successful read, the indicator LED lights in green, indicating
that the scanner is ready to register
new master data.
*Verification retry after mismatch in 2-point verification
The 2-point verification read provides the "Verification retry after mismatch" option that retries verification against
the
same master data. Enabling this option readies the scanner not for registering new master data but for reading a bar
code again if the verification result is a mismatch.
Disabling this option readies the scanner for registering
new master data after bar code reading, no matter what the
verification result is.
Note: Any of the following events clears the master data stored in the scanner.
- Customizing the scanner by modifying the parameters with the configuration software (ScannerSetting) or
batch-process bar code symbols.
- Modifying the "verification start position in data verification mode" or "number of characters to verify, starting
from the verification start position" setting with the bar-coded parameter menu.
- The scanner power is turned off due to the removal/replacement of the battery cartridge or the low battery.