manualshive.com logo in svg

Denso 400BW-CE, Руководство пользователя

Поделиться
Скачать
Denso 400BW-CE Скачать руководство пользователя страница 3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Copyright © DENSO WAVE INCORPORATED, 2007 

All rights reserved. No part of this publication may be reproduced in any form or by any means without 
permission in writing from the publisher. 

Specifications are subject to change without prior notice. 

Microsoft, Windows and ActiveSync are either registered trademarks or trademarks of Microsoft 
Corporation. 

Other products and company names mentioned in this manual are trademarks or registered trademarks 
of their respective holders. 

The latest precision manufacturing technology yields LCD panels whose pixels are 99.99% defect free. 
The downside, note, is that up to 0.01% of the pixels can remain permanently dark or lit on today's 
state-of-the-art panels. 

Thin Newton's rings (rainbow-like patterns) may appear on the touch panel.  
This does not necessarily indicate a problem with the touch panel. 

Содержание 400BW-CE





















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды