iPhone 3G and iPhone 3GS fits the Car Dock immediately, no rubber pads are needed.
4.1.4.2) Docking of iPhone 4
In the package of the Car Dock you can find three self-adhesive rubber pads. Before
connecting an iPhone 4, please install these as shown on the picture below:
4.1.5) Bluetooth connection
To activate the handsfree function, the iPhone needs to be paired to the Car Dock for iPhone
via Bluetooth. The Bluetooth pairing can be made on the following way:
a) Enter the Bluetooth Settings menu of your iPhone
b) Switch on the Bluetooth in the Bluetooth Settings menu of your iPhone
c) Dock your iPhone in the Car Dock
d) ’Car Dock for iPhone’ will appear in the device list of the Bluetooth Settings menu of
your iPhone
e) Connect to the ’Car Dock for iPhone’ device
f) Enter the Bluetooth PIN code of the Car Dock for iPhone: 8888
After the pairing is done, the Car Dock will automatically connect to your iPhone via
Bluetooth, each time you dock it. If you remove the iPhone from the Car Dock, the Bluetooth
will be automatically disconnected.
4.2) Charging
The Car Dock can work without having 12V power (cigar lighter, or Dension Gateway)
connected. However, in this case you risk draining your iPhone battery quickly and the
quality of the built-in FM transmitter may be lower. Therefore it is suggested to connect to
12V power supply, or Dension Gateway whenever you use the Car Dock.
4.3) Audio connection
If the iPhone is docked in the Car Dock, its audio output (including music, phone and app
audio) is transmitted to the car. There are 3 different methods to transmit the audio to the
car:
4.3.1) FM transmitter
If you have a Car Dock with a built-in FM transmitter, you can activate it by docking the
iPhone in the Car Dock, launching the Car Dock Mode app, entering the Settings menu and
switching FM on. (See section 2.14.2)