Dension DBR-9202-1 Скачать руководство пользователя страница 2

FM FREQUENCY SETUP

Manual Scanning

In order to set the FM frequency, you need to follow the next 
steps:

• 

Turn the ignition ON,

• 

Press and hold the         button for 3 seconds,

• 

Enter the frequency  
(from 87.6 [876] to 107.9 [1079]),

• 

Press the         button to store the valid frequency,

• 

Switch to the selected frequency with your radio.

Automatic Scanning

You can also start an automatic FM frequency scan. To use this 
option, you need to do the following:

• 

Turn the ignition ON, 

• 

Press and hold the         button for 3 seconds,

• 

Press the         up arrow button.

After this, the device will be looking for a free frequency and 
will set it automatically. This frequency can be found if you do 
an FM scan with your radio.

If the NOSIGNAL message appears on the radio, that means 

there is no DAB reception. In this case, please check the 
location and the connection of the areal.

Navigation between stations

By pressing the        up and        down arrow buttons, you 
can skip to the next or previous stations. If you press and hold 
these buttons, you can skip in 5 station steps (alphabetically).

Presets

You can store presets to the          -         buttons  To store the 
actually played station, you need to press and hold one of the 
numerical buttons.
After this, you can switch to that station directly by short 
pressing the same button.

Auxiliary source

The device gives you the possibility to listen to music from an 
external source through a 3,5mm Jack connector. In order to 
mute the DAB radio and use the Auxiliary input of the device, 
you need to press the        button. In this mode, you should see 
“AUX” in the RDS display.
Pressing the button again reactivates the DAB source.

POWER SUPPLY INFORMATION

Use the included car side power cable and connect the 
3 power leads as follow: 

3 wire installation

• 

Red: +12V Battery (permanent 12V or ACC)

• 

Purple: +12V Switched (ACC or ignition)

• 

Black: Ground (GND)

2 wire installation

• 

Red & Purple Terminated together: +12V Switched

• 

Black: Ground (GND)

DISCLAIMER AND WARRANTY

Disclaimer

If your car’s electrical system begins to behave 

 

erratically, please disconnect the DAB+R device physically  
immediately and have it checked by your installer. 
Dension and its authorized distributors and retailers are not 
liable for any incidental consequential or indirect damages or 
loss and do not assume liability for any diagnostic fees.
The use of handheld devices while driving may be subject to 
government legislation. Please ensure that your use of the 
Dension device complies with applicable traffic laws. Dension 
does not assume liability for any events resulting from the  
illegal or irresponsible use of handheld devices while driving.
Dension reserves the right to modify its products or 

 

specifications without prior notice.

Warranty

Dension devices carry a one-year limited warranty that 
protects you from defects in material and workmanship of 
products sold by Dension or its authorized distributors and 
retailers. Dension does not warrant any installation work or 
assume liability for any damage caused due to negligence, 
improper installation or operation. For warranty claims, proof 
of purchase is required

REMOTE CONTROLLER

Diagnostic

During playback, with the         button, you can switch 
between the text of the actually played DAB channel and 
between the software information of the DAB+R device and 
of the DAB module.

Please note:

 The device connected to the auxiliary input 

has to be paused separately, using the controls of the 
device itself.

Please Note:

 Our product has the memory back up so the 

Permanent feed is not required for all installations

FM

DAB+R

OPERATION

During the first use or if there is no station selected, the 

DAB+R title is shown on the RDS display

 of the radio.

First of all, you need to perform a DAB scan which you can do 
by pressing the       button. During the scan, you should see 

DAB SCAN on the display.

SRC

SCAN

FM

0

INFO

SRC

FM

FM

INFO

SCAN

Отзывы: