Dension 500S, Руководство пользователя

Страница: 9 / 17

16 17
Please note: After changing settings you need to turn the Gateway off
completely in order to load the system with the new settings. For your
information: some settings (e. g. volume) don’t require restart.
9. OPERATION IN BMW
WITH NON-iDRIVE
FIRST STEPS
Switch on your car radio and push the ‘Audio’ button. Here you can select
CDC as source, which is now the Gateway device.
Connect your iPod or USB storage to the Gateway. It will start playing
the first song on the device. In case the Gateway was in use earlier, the
music will continue playing from your iPod or USB from where it stopped
previously.
When switching off the radio the playback will stop and the source device
will go on standby.
Accessing the menu
The menu of the Gateway is displayed on the screen of the head unit.
Entering the menu
To enter the menu of the Gateway, you need push the ‘LIST’ button
on the head unit and then you can move the cursor by rotating the right
side rotary knob. If you push the knob, you can select a menu element.
To see the information of the currently played song, you need to select the
‘Now Playing’ menu, which you can reach with the ‘BACK’ button . The
device jumps to Now Playing mode automatically after a certain time or
when a song is selected from the menu.
The UP Button brings you with one submenu back in the menu of the
Gateway.
Selecting the music source
In the source menu, you can select between the available music sources.
Please note: In all cases, the Gateway starts to play the last connected
music source automatically.
These sources can be:
►
GW AUX: The analogue Aux input of the Gateway. No control function is
available. AUX can be used if Connector port is connected.
► iPod UI: The playback is controlled via iPod.
► iPod GW: The playback is controlled from the Gateway device (in this
case the iPod controls get disabled).
► USB: The playback is controlled from the Gateway.