
ENGLISH
Get
ting Star
ted
Connections
Specifications
ENGLISH
Connections
2
CAUTION
• Be sure to turn the amplifier’s power off before connecting the
speakers to the amplifier.
• If the polarities are inverted, the phase may be off and the sound
may have no bass component, making it seem unnatural. Be sure to
connect the polarities properly.
When connecting, be sure to read the amplifier’s owner’s manual
carefully and connect properly.
• Connect the input terminals on the rear panel of the speaker with the
speaker output terminals on the amplifier, using the speaker cables
(Supplied).
• Connect the speaker for the left channel to the “L” terminal on the
amplifier, the speaker for the right channel to the “R” terminal on the
amplifier, making sure to check the polarities (“+” and “–”).
•
There are various types of speaker output terminals on amplifiers.
Check your amplifier’s owner’s manual.
Connections
Once connections are completed, pull gently on the speaker cables to
check that they are securely connected.
CAUTION
Do not let the core wires of two speaker cables touch each other.
Doing so will short-circuit the amplifier circuitry and damage the
amplifier.
1
Twist firmly the wires by hand so
thattheydonotstickoutandcause
short-circuits.
2
Loosentheterminalbyturningtotheleftandinsert
the speaker cable through the hole in the speaker
terminal.
3
Tightentheterminalbyturningtotherightandcheck
thatthecorewireisnotprotrudingfromthehole.
Connect to
amplifier’s “+”side:
Striped core
Connect to amplifier’s
“–” side: Plain core
“–” side
terminal: Black
“+” side terminal: Red
Use the included speaker cable to connect the input terminals on the
back of the speakers to the amplifier’s speaker output terminals.
• The net on the front of the speakers can be removed.
• To remove, grasp both sides of the net and pull forward.
•
To mount, line up the projecting pieces in the four corners of the
speaker net with the holes in the four corners of the cabinet and
press in.
Sheath
Connections
Removing the Speaker Net
Type:
2-way · 2-speakers
Low-leakage-flux, Reflex box
Frequency range:
40 Hz ~ 40 kHz
Input impedance:
6 Ω/ohms
Max. input:
60 W (IEC), 120 W (PEAK)
Sensitivity:
86 dB (1 W · 1 m)
Crossover frequency:
3 kHz
Speakers:
14 cm (5-33/64”) cone bass-mid x 1
2.5 cm (63/64”) soft dome high range x 1
Maximum external
dimensions:
182 (W) x 296 (H) x 237 (D) mm
(7-11/64” x 11-21/32” x 9-21/64”)
Weight:
5.2 kg
(11 lbs 7.4 oz)
b
For improvement purposes, specifications and design are subject
to change without notice.
Specifications
Specifications
Remo
ving the Speak
er Net
1.SC-F107EM_ENG.indd 5
2009/06/09 17:28:35