Denon PMA-150H, Руководство пользователя

Страница: 115 / 145

No sound comes out
No sound is produced. Or sound is distorted.
0
Check the connections for all devices. (
v
p. 21)
0
Insert connection cables all the way in.
0
Check that input connectors and output connectors are not reversely connected.
0
Check cables for damage.
0
Check that speaker cables are properly connected. Check that cable core wires come in contact with the metal part on speaker terminals. (
v
p. 22)
0
Securely tighten the speaker terminals. Check speaker terminals for looseness. ( v p. 22)
0
Check that the proper input source is selected. (
v
p. 35)
0
Adjust the volume. (
v
p. 35)
0
Cancel the mute mode. (
v
p. 35)
0
Check that the correct input source is selected when audio is being input to this unit from an external device. (
v
p. 35)
0
Check the digital audio output setting on the connected device. The initial settings may be off depending on the device.
0
No sound is output from the speakers when headphones are connected. (
v
p. 13)
0
Do not input Dolby Digital, DTS, AAC or other non-linear PCM signals into the OPTICAL 1/2 or COAXIAL jacks of this unit. This causes noise and could
damage the speakers. (
v
p. 74)
0
To playback via a Bluetooth connection, perform pairing between this unit and the Bluetooth device. (
v
p. 44)
Contents Connections Playback Settings Tips Appendix
115
Front panel Rear panel
Remote control
unit
Index