IR Control
Assign operations on this unit to the remote control of your TV. This
enables you to operate this unit with the remote control of your TV.
1
Use
ui
to select the operation on this unit to be
performed with the remote control of your TV and
press ENTER.
Volume Up
/
Volume Down
/
Mute
/
Power Toggle
/
Power On
/
Power Off
/
Input Optical In 1
/
Input Optical In 2
/
Input
Coaxial In
/
Input Analog In 1
/
Input Analog In 2
0
The operations indicated by a check mark are already assigned to the TV
remote control. To assign an operation to a different button, press ENTER
while the operation is indicated by a check mark to remove the check mark,
then configure the setting again.
2
Follow the instructions in the display to configure the
setting.
The set operation on this unit is indicated by a check mark after the
setting is complete.
Language
Sets the language for display the menu.
English / Deutsch / Français / Italiano / Nederlands / Español /
Svenska / Русский / Polski
(Default : English)
Auto-Standby
Sets the amount of time that must elapse without unit operation or an input
signal before the unit goes into standby automatically.
Off:
The unit does not go into standby
automatically.
1min:
The unit goes into standby after 1 minutes.
5min:
The unit goes into standby after 5 minutes.
15min
(Default):
The unit goes into standby after 15 minutes.
Other:
Sets the minutes (between 1 and 99) before
the unit automatically goes into standby.
After setting the amount of time with 0 – 9,
+10 buttons, press ENTER to confirm the
setting.
95
