Denon Nippon DN-600F, Руководство по эксплуатации

Страница: 11 / 14

(2) Playing the Programmed Tracks
• Press the PLAY button to play the tracks in the programmed order.
(3) Clearing the Program
• The entire program is cleared when the PROG/DIRECT button
is pressed again. The program is also cleared when the
(OPEN/CLOSE) button is pressed.
• If the PROG/DIRECT button is pressed during programmed
play, the program is cleared and playback continues normally
through to the last track on the disc.
NOTES
• If programming is done in the play or pause mode, the track
currently playing is programmed at the first position. Other
tracks can be added to the program, but the number of
programmed tracks and the playing time will not be
displayed.
• Direct search is not possible during programmed play. If the
number buttons are pressed, that track is added to the end
of the program.
• Programming is possible with the disc holder open. Track
numbers greater than the number of tracks recorded on the
disc can be programmed, but will be automatically cleared
before playback begins.
• The remaining time per track will only be displayed for
track numbers 1 through 20.
• The total program time and remaining program time are not
displayed if tracks greater than track number 20 are
programmed.
(1) Manual Search Forward
1. Press the manual search forward button during play
back. Playback of the track is sped up.
• As a reference, the current track number and elapsed playback
time within the track are displayed.
• Manual search forward is approximately three times faster when
engaged during the pause state compared to playback. In this
case, no sound is heard however.
• If the manual search forward button is kept pressed after the end
of the final track on the disc is reached, (JJ)
is
displayed and
manual search stops. To return to another point, press the
manual search reverse button until (JJ) disappears.
(2) Manual Search in Reverse
1. Pressing the auto space button (A. SPACE) will cause the
A. SPACE indicator to light.
2. Press the play button to start playback.
When a track has been played to its end, a 4-second silence is
made before the next track starts playing.
3. Press the auto space button (A. SPACE) again to cancel the
function.
11
1. Press the manual search reverse button during playback.
Reverse playback of the track is sped up.
As a reference, the current track number and elapsed
playback time within the track are displayed.
Manual search in reverse is approximately three times faster
when engaged during the pause state compared to playback.
In his case, no sound is heard however.
If the manual search reverse button is kept pressed after the
beginning of the first track on the disc is reached, CC is
displayed and manual search stops. To return to another
point, press the manual search forward button until (CC)
disappears.
7. Inserting blanks between tracks ............... Auto Space
This is convenient feature that will insert 4-second blanks
between tracks, which can be used when recording compact
discs on tape.
5. Pausing playback at any point ................................. Pause
• Playback can be temporarily halted and then continued from
the same point in the track.
1. Press the pause button during playback.
2. To continue playback, press the play button or the
pause button once more.
Audible quick search ............................. Manual Search
• Using this function, you can cue to a desired point within a
track, either in the forward or reverse direction.
• Release the manual search button when the
desired point has been reached. Normal playback then
continues.