✽
Set the “AUDIO SETUP” default setting as shown below. (See pages 38 ~ 41.)
• “DIGITAL OUT”
→
“PCM”
“LPCM (44.1kHz/48kHz)”
→
“ON”
Playing DVDs with incorrect settings may result noise that could damage your ears or the speakers.
15
ENGLISH
(5) Connecting to a Digital Recorder (MD Recorder, DAT Deck, etc.)
8
9
B
Optical fiber cable (commercially available)
75
Ω
/ohms pin-plug cable (commercially available)
DVD-3910
(6) Connecting to a Stereo Component
DVD-3910
Stereo component
NOTE:
• When connecting to a 2-channel audio stereo device using the 5.1ch AUDIO OUT, set “AUDIO CHANNEL” under “AUDIO SETUP”
on the “SETUP” to “2CH (SRS OFF) ” or “2CH (SRS ON) ” (See page 38.). For multi-channel sources, the signals are down-mixed
into two channels (analog).
(Only the front left and right channels are output for sources for which down-mixing is prohibited.)
Digital audio
input connector
(COAXIAL)
Digital audio
input connector
(OPTICAL)
NOTE:
• Digital audio signals cannot be output when playing Super Audio CDs. Use analog connection to record Super Audio CDs.
(or)
