Denon DVD-3800BD, Руководство пользователя

Страница: 17 / 46

13
Connections
ENGLISH
Connections
ENGLISH
*
1
For the BD title with secondary or interactive audio, these audio will be output as Dolby Digital
when all the conditions listed below are met:
• When “BD Audio Mode” is set to “Mix Audio Output”.
• When “HDMI Audio Out” is set to “Audio Mute”.
• When “Digital Out” is set to “Bitstream”.
If the BD title does not have secondary or interactive audio, the audio will be output as shown in the
table.
*
2
In order to output LPCM signal from DIGITAL OUT jack, set “BD Audio Mode” to “Mix Audio
Output”. (Bitstream signal will be output when “HD Audio Output” is selected.) Refer to page 24
and 33.
• This table applies only when HDMI is not connected or the “Audio Mute” is selected in “HDMI Audio
Out” setting.
Analogue 7.1ch/5.1ch audio signals can be output from 7.1ch AUDIO OUT jacks.
Disc type Audio recording format “Digital Out” setting
Bitstream LPCM
BD-video
Dolby Digital Dolby Digital 2ch Downmix LPCM
Dolby Digital Plus Dolby Digital 2ch Downmix LPCM* 2
Dolby TrueHD Dolby Digital
2ch Downmix LPCM*
2
DTS
DTS*
1 2ch Downmix LPCM
DTS-HD DTS*
1
2ch Downmix LPCM*
2
LPCM
2ch Downmix LPCM*
1 2ch Downmix LPCM
DVD-video
Dolby Digital Dolby Digital 2ch Downmix LPCM
DTS DTS 2ch Downmix LPCM
LPCM 2ch Downmix LPCM 2ch Downmix LPCM
MPEG MPEG 2ch Downmix LPCM
DivX
®
Dolby Digital Dolby Digital 2ch Downmix LPCM
MP3/MP2 2ch LPCM 2ch LPCM
audio CD/ MP3/Windows Media™ Audio 2ch LPCM 2ch LPCM
DTS-CD DTS 2ch Downmix LPCM
Note
• In order to output LPCM signal from DIGITAL OUT jack while outputting the HDMI audio signal,
set “BD Audio Mode” to “Mix Audio Output” and set “HDMI Audio Out” to “HDMI Multi(LPCM)”.
Note for Optical Cable
• Optical cable may be damaged when bent at sharp angles. Ensure cables are coiled in loops with
a diameter of 15cm (6 inches) or more when storing them.
• Use a cable which is 3m (9.8 feet) or shorter.
• Insert cable plugs firmly into the jacks when making connections.
• If a plug has dust or is dirty, clean it with a soft cloth before inserting it into a jack.
Cables not included.
Please purchase the necessary cables at your local store.
Connection to a Device with 2-channels of Analogue Audio Inputs
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
Note
• When connecting to a 2-channel audio stereo device, use the 2ch AUDIO OUT jacks. If the 7.1ch
AUDIO OUT jacks are used, set “7.1ch Audio Out” in the “Audio” menu to “2 Channel” (Refer to
page 34). For software recorded in multi-channel, analogue signals that have been down-mixed
into 2 channels are output. (For sources which are prohibited from down-mixing, only the FL/FR
signals are output.)
Surround Connections to a Device with 7.1/5.1-channels of Analogue Audio Inputs
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
Please purchase the rest of the necessary cables at your local store.
AC IN
RS-232C
STRAIGHT CABLE
IN
ROOM TO ROOM
REMOTE CONTROL
COMPONENT VIDEO OUT VIDEO OUT
7.1ch AUDIO OUT
OPTICAL
DIGITAL OUT ( PCM / BITSTREAM)
COAXIAL
2ch AUDIO OUT
FR
SW SR SL SBR SBL C
FL
S VIDEO OUT
HDMI OUT
Y PB/CB PR/CR
2ch AUDIO OUT
L R
OUT
R
L
AUDIO IN
audio
RCA audio cable
Stereo component
this unit
R
SURROUND
L
CENTER
SUB-
WOOFER
R
SURROUND
BACK
L
VIDEO OUT
7.1ch AUDIO OUT
OPTICAL
DIGITAL OUT ( PCM / BITSTREAM )
COAXIAL
2ch AUDIO OUT
FR
SW SR SL SBR SBL C
FL
S VIDEO OUT
R
L
HDMI OUT
FRONT
AV amplifier
audio
this unit
E5J00_02_04ED_V2_EN.book Page 13 Thursday, October 16, 2008 12:00 PM