11
Get
ting Star
te
d
Connections
Basic Oper
ations
Specifi
cations
Tr
oubleshooting
Ef
fect
or F
unction
Fader Start
Utility
USB
Setting the beat
1
Press the
BEAT
,
buttons to set the number of
beats.
2
When
the
TIME
button is pressed, the
mode is changed to the time input mode.
The time can be adjusted by pressing the
BEAT
,
buttons.
3
When the
TIME
button is pressed again, the number
of beats setting mode is restored.
Crossfader Start
1
Using the
channel input source selector
controls
(SOURCE SEL LN1/LN2/LN3/LN4/D1–4/USB), select
the desired source from LINE1 CD, LINE2 CD, LINE3
CD or LINE4 CD.
2
Set the
CROSSFADER ASSIGN
switches (A/THRU/B)
to A or B.
3
Turn on the
CROSSFADER START
switches.
4
Slide the
Crossfader
all the way in direction opposite
the source you want to start. (In the following example,
startup is done with the CD player connected set to
Assign A.)
5
Set the standby mode on CD player.
6
Use the
CROSSFADER CONTOUR
control to control
the cross fader startup curve.
7
When the
Crossfader
is slid in the opposite direction,
CD player play will begin.
Channel Fader Start
1
Using the
channel input source selector
controls
(SOURCE SEL LN1/LN2/LN3/LN4/D1–4/USB), select
the desired source from LINE1 CD, LINE2 CD, LINE3
CD or LINE4 CD.
2
Turn on the
CH FADER START
switch.
3
Move the
Channel input fader (CH FADER)
of CH-1,
CH-2, CH-3 or CH-4 control all the way to the
bottom.
4
Set the standby mode on CD player.
5
When you want to start the player, move up the
Channel input fader (CH FADER)
and the CD player
will begin playing.
Fader Start
Selecting the effects
Turn the
EFX SELECT
controls to select the effect, and press the control
to enter the desired effect.
Turning the effects ON and OFF
When the
Effect ON/OFF
buttons are pressed, the effect is turned ON
or OFF.
F
ader Star
t
