ENGLISH
Getting Started
Connections
Specifications
Replacing the Channel Fader
The Channel fader may be removed without any disassembly of
the DN-X1100 itself.
1
Pull out the
Channel fader
knob.
2
Remove the five outer screws
attaching the channel
fader plate and channel fader bracket assembly from
the front panel.
3
Remove the two screws
attaching the channel
fader bracket assembly from chassis.
4
Pull the channel fader bracket assembly forward
and unplug the 4P cable from the connector on the
channel fader printing board.
5
Install the replacement assembly by reversing above
instructions.
Flex Fader Crossfader Slide
Torque Adjustment Procedure
1
Follow the procedure at “Replacing the Crossfader”
to remove the
Crossfader
from the set.
2
Move the lever so that the head of the
Screw
is
positioned at the hole in the case.
3
Turn the
Screw
using a screwdriver, move the lever
and adjust to the desired torque.
4
Reinstall the
Crossfader
following the removal
procedure in reverse order.
Fader Star
t
Crossfader
Crossfader
........
Screw
