Denon DN V310 - Professional DVD Player, Инструкция по эксплуатации

Страница: 6 / 26

６
Serial Remote Control (continued)
Send one command at a time.
Example: When playing a DVD, pause after playing Title 1.
[PC,PlayT,1]<CR>
→
Command to play Title 1 sent from controller.
[PC,PlayT,0]
←
Reply of error code 0 (no error) from DN-V310.
[PC,RC,48]<CR>
→
Pause command sent from controller.
[PC,RC,0]
←
Reply of error code 0 (no error) from DN-V310.
[PR,StatusChange,0,5]
←
Issue of status change (pause) message from DN-V310.
Error codes
If the structure of the command from the controller was wrong or the contents of the command were
invalid for any reason, a message consisting of an error code added to the sent command is returned.
List of error codes
Error code Name Description
0 No error Message received normally.
1 Cause of error not known Error of unknown cause has arisen.
2 Invalid parameter Invalid parameter received.
5 Command not valid Invalid message structure detected.
Parameter outside of specified range received.
10 Command not valid for
Current disc Message invalid for current disc type received.
Example: When a command for starting to play Title 80 on a disc only including 20 titles was sent.
[PC,PlayT,80]<CR>
→
Command to play Title 80 sent from controller.
[PC,PlayT,2]
←
Error code 2 returned from DN-V310 and no response.
Command reference
Commands are combinations of two ASCII code characters.
The basic format of transmission commands is
[group,command,parameterlist]<CR>
.
Ⅰ
. External Control Commands: List of PC group external control commands
Command name Command Function Parameter range
1 Remote control command RC Perform same command as for
infrared remote control operation. See list of PC RC
command control
parameters
2 Play Title or Track PlayT Play assigned title or track number.
0 to 99
3 Play Chapter PlayC Play assigned chapter number. Title : 1 to 99
Chapter : 1 to 999
4 Time search Time Play starting at specified time. H : 0 to 6
m : 0 to 59
s : 0 to 59
5 Set audio stream SetAST Set the DVD audio stream number.
1 to 9
6 Set sub-picture stream SetSPST Set the DVD sub-picture stream
number.
0 to 32
7 SW on/off OSD display OSD Turn the OSD display on (displayed)
or off (not displayed).
ON/OFF
8 SW on/off
Local keyboard Lock
LKC Turn the main unit front panel’s lock
on (panel’s key lock) or off (panel’s
key available).
ON/OFF
9 SW on/off IR remote control RCC Turn IR remote control on or off.
ON/OFF
10 Set resolution
SetREZ
Set HDMI resolution. 0 to 4
11 Standby on/off Stby 0:/1