8
8
DN-C615
2.
µ
COM VERSION UPGRADE
System
µ
com can be upgraded in the following manner.
Version Upgrade Method
(1)
Record the version upgrade software on a CD-R or CD-RW disc, only as one file with the format ISO9660 Mode-1. The file
name of the supplied version upgrade software should be used as is and this disc needs to finalize.
(2)
Hold the disc by the edges and place it on the disc tray.
(3)
Press the OPEN/CLOSE button to start the version upgrade.
"Version Up"
"Push Play!" "xxxx->XXXX" are displayed.
xxxx : current version
XXXX : upgrade version
(4)
Press the PLAY button.
"Now Writing"
"Writing-XXX" are displayed.
XXX : count up from 000 to129
(5)
When the version upgrade is finished, "Complete!" is indicated.
(6)
Turn off the power once and turn on again. Press the OPEN/CLOSE button and remove the disc.
NOTE:
When the power is turned off before “Complete!” is displayed,
µ
con version is not written correctly.
Error Code
CONTENTS
Error 19
The focus fine gain is outside the regulation range.
Error 1A
Unable to adjust the tracking fine gain in the regulation time.
Error 1B
The tracking fine gain is outside the regulation range.
Error 1C
Unable to adjust automatically in the regulation time.
Error 1D
Unable to read the subcode Q in the regulation time.
Error 1E
Unable to read the TOC in the regulation time.
Error 1F
Focus servo down during search (over the regulation time).
Error 20
Track servo down during search (over the regulation time).
Error 2116
Servo error during search.
Error 2103
Search error (over the regulation time).
Error 22
Discontinuity occurred, during write to the DRAM.
Error 23
The error which cannot be corrected to the read data.
Error 24
Unable to do the level detect.
Error 25
Unable to join data in the regulation time.
Error 26
The error rate when recording on the memory is over the regulation value.
Error 27
The subcode jump more than regulation.
