28
Video resolution
This section is for making the settings for video output resolution. Set them depending on the connected
television.
Press
VIDEO RESOLUTION
.
•
The resolution is changed as shown below each time
VIDEO RESOLUTION
is
pressed.
•
You cannot set resolution individually for each HDMI output.
•
When you press and hold
VIDEO RESOLUTION
with the resolution appearing
on the display, "HDMI INIT" appears on the display and the setting returns to
the default.
•
The default settings is underlined.
Auto
480/576i
1080P24
1080P
1080i
480/576P
720P
Source Direct
(Auto)
(1080 progressive, 24-frame)
(Source direct)
(1080 progressive)
(480/576 interlaced)
(1080 interlaced)
(480/576 progressive)
(720 progressive)
•
If the video resolution is not set to “Auto”, set it to correspond with the resolution of your television/AV
receiver.
•
Images will not be projected normally if the television/AV receiver resolution and this unit’s output
resolution do not match.
•
Audio and video will be temporarily interrupted if the power of the connected device currently playing is
turned off, or the input is switched.
•
When you change the video resolution of the unit, it takes a few seconds up to about 10 seconds for
validation between the unit and the connected device. Audio/video is not output during this period.
Settings enabled during playback