Denon DBP-1611UD, Руководство по обслуживанию

Страница: 7 / 74

7
CAUTIONS IN SERVICING
Initi i in BD p er
BD player initiali ation should be performed when the com, peripheral parts of com, and MAIN P.W.B. were replaced.
1. Turn on this model s power. "NO DISC" is displayed on the FL tube.
2. Press the this model s
2 and DISC LAYER buttons simultaneously. "INITIALI IN " is displayed on the FL tube.
3. The display on the FL tube switches to "INITIALI ED", the "NO DISC" display reappears and initiali ation is
completed.
Ser ice too s
f
Measuring Disc: CD TCD-784
DVD VT 02 or TDV- 20A
BD ABD- 20 or BLX-108
z Refer to "MEASURIN MET OD AND WAVEFORMS".
When you repair the BD MEC A UNIT, you can use the following I .
Please order to marant Official Service Distributor in your region if necessary.
Do not supply it : 2-Dimensional Bar Code Reader (DS6708 made by Symbol Co. etc.) : 1 Set
Do not supply it : 232C (TTL) USB conversion jig (Model: DUT-0663 by eeeTech): : 1 Set
Part No. :6120 000300AS : 4P RE-P CONN CORD (1000mm): : 1 Set
z Refer to " OW TO REPLACE T E MEC A UNIT (TRAVERSE)".
Note
•
If step 3 does not work, start over from step 1.
•
All user settings will be lost and this factory setting will be recovered after the set is initiali ed.
So make sure to note down your setting beforehand for restoring after the initiali ation.
ON STANDBY
2 DISC LAYER