background image

6.4.3. Abnormality in ANALOG IN

6.4.2. Abnormality in BLUETOOTH

Check the OP-AMP of [U13] output.

MAIN PCB 

[U13 : 1, 7pin]

Audio signal is output as normal

Check the Control Port of BT Module.

(check by switching the input to BLUETOOTH 

and turning pairing on)

MAIN PCB 

[U15 : 20, 22, 23, 24, 38, 42, 45pin]

20pin : Hi

22pin : "Lo" at Pairing ON.

23pin : "Hi" at Pairing ON.

24pin : Lo

38pin : Lo

42pin :  The voltage changes from 1.2V to 3.3V 

when playing audio content

45pin : Lo

Controlled as normal

Check the Audio Line of ANALOG IN.

MAIN PCB 

[P1 : 1, 3pin] → [U17 : 4, 11pin]

No sound is output from the BLUETOOTH input 

source

Check the Audio signal Line of [U13] output.

MAIN PCB 

[U13 : 1, 7pin] → [U17 : 5, 14pin]

Check the Audio Line of [U13] output.

MAIN PCB 

[U15 : 54, 55, 56, 57pin]

Audio signal is output as normal

Check the circuits around [U13]. If there are no 

abnormalities, there may be a defect in [U13]

MAIN PCB

Check the connection of [U10 : 44, 51, 55, 52, 50, 

56, 54pin].

Go to "

6.4.3. Abnormality in ANALOG IN

"

Check the circuits around [U15]. If there are no 

abnormalities, there may be a defect in [U15].

(Change the MAIN PCB)

NO

NO

NO

NO

YES

YES

YES

YES

Before Servicing 

This Unit

Electrical

Mechanical

Repair Information

Updating

43

Содержание D-T1




















































Отзывы: