manualshive.com logo in svg

Denon CEOL RCD-N8, Руководство по обслуживанию

Поделиться
Скачать
Denon CEOL RCD-N8 Скачать руководство пользователя страница 33

33

5.2.  Heat run Short mode

Playing last track on disc. After disc playback has finished, then tray open and close. And playback again. 

The heat run repetition no. is incremented (increased by 1) when the tray is opened. 

Repeat this operation.

[H.R. Short] displayed.

Select "H.R.Short", and press 

1

/ 

3 

ENTER button.

Press the Cursor 

u

 button to display the count.

5.3.  Heat run chacking mode

TOC read the CD, the first song disk search, open / closed later, and again read TOC. 

The heat run repetition no. is incremented (increased by 1) when the tray is opened. 

Repeat this operation.

[H.R. Chacking] displayed.

Select "H.R.Chacking", and press 

1

/ 

3 

ENTER button.

Press the Cursor 

u

 button to display the count.

5.4.  Error display

Press the Cursor 

u

/

i

 to display the error information.

Heat run error code table

Error Code

Details of Error code

E1-00

Disc cannot be detected

E1-01

Tracking offset adjustment not possible

E1-02

Focus offset adjustment not possible

E2-00

Focus servo dropped during playback.

E2-01

Focus servo dropped during searching.

E2-03

Focus servo dropped during TOC reading.

E2-05

Focus servo dropped during manual search.

E2-10

Subcode can no longer be read during playback

E2-11

Subcode can no longer be read during searching

E2-12

Subcode can no longer be read during TOC reading

E2-14

Subcode cannot be read during pause

E2-15

Subcode cannot be read during manual search

E3-00

TOC could not be read within specified time

E3-01

PVD/SVD analysis could not be completed within specified time

E4-04

Search time out (The search was not completed within the stipulated time)

E4-05

Decoder bus error (Error in communications with CD decoder)

E5-00

Inner switch not on

E6-00

Inner switch not off

E8-00

Tray is not opened by the specified time.

E8-01

Tray is not closed by the specified time.

E9-00

CD Microprocessor error

E9-01

Other error

Содержание CEOL RCD-N8












































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды