Denon AVR-X6500H Скачать руководство пользователя страница 145

Страница: 145 / 334

DTS sound mode

Sound mode type

Description

DTS Surround

This mode can be selected when playing sources recorded in DTS.

DTS ES Dscrt6.1

This mode is suitable for playing discs recorded in DTS-ES.

The surround back channel added using the discrete method is played as an independent channel.

Since all channels are independent, the 360-degree spacial expressiveness and sound localization are enhanced.

DTS ES Mtrx6.1

This mode is suitable for playing discs recorded in DTS-ES.

The surround back channel added to the surround-left and surround-right channels by a matrix encoder at software

recording time is decoded by this unit’s matrix decoder and played from each channel (surround left, surround right,

surround back).

DTS 96/24

This mode can be selected when playing sources recorded in DTS 96/24.

DTS-HD

This mode can be selected when playing sources recorded in DTS-HD.

DTS Express

This mode can be selected when playing sources recorded in DTS Express.

DTS:X

This mode can be selected when playing back content encoded with DTS:X.

It decodes DTS:X content and its positioning data in real time and outputs audio from the appropriate speakers, creating

natural audio images regardless of the speaker layout. Use height speakers to realize a three-dimensional sound field.

DTS Neural:X

This mode uses DTS Neural:X Upmixer to extend various sources to natural and realistic multi channels for playback.

Use height speakers such as front height speakers to realize a three-dimensional sound field.

DTS Virtual:X

This mode uses DTS Virtual:X with virtual height and virtual surround processing to realize a three-dimensional sound field

when the height speakers are not used.

1 This can be selected when “Speaker Config.” - “Surr. Back” is not set to “None”. (

p. 229)

2 This can be selected when Height, Ceiling and Dolby Atmos Enabled speakers are not being used.

3 It cannot be selected when the input signal is Dolby Digital, Dolby Digital Plus, Dolby TrueHD or Dolby Atmos.

145

Содержание AVR-X6500H














































































































































































































































































































































Результаты поиска

Содержание AVR-X6500H

Отзывы:

Похожие инструкции для AVR-X6500H

Бренды по названию

Популярные бренды

Denon AVR-X6500H, Руководство пользователя

Результаты поиска

Содержание AVR-X6500H

Отзывы:

Похожие инструкции для AVR-X6500H

Бренды по названию

Популярные бренды