Denon AVR-X6400H, Руководство пользователя

Страница: 41 / 325

o
Connecting the speaker cables
Carefully check the left (L) and right (R) channels and + (red) and –
(black) polarities on the speakers being connected to this unit, and be
sure to connect the channels and polarities correctly.
1
Peel off about 3/8 inch (10 mm) of sheathing from the
tip of the speaker cable, then either twist the core wire
tightly or terminate it.
.
2
Turn the speaker terminal counterclockwise to loosen it.
.
3
Insert the speaker cable’s core wire to the hilt into the
speaker terminal.
.
4
Turn the speaker terminal clockwise to tighten it.
.
o
Connecting the subwoofer
Use a subwoofer cable to connect the subwoofer. Two subwoofers can
be connected to this unit.
To use two subwoofers, set “Subwoofer” to “2 spkrs” in the “Speaker
Config.” setting. (
v
p. 222)
The level and distance can be set separately for Subwoofer 1 and
Subwoofer 2.
.
CENTER SURROUND SURROUND BACK SURROUND FRONT SURROUND BACK FRONT
SW1 SW2
Contents Connections Playback Settings Tips Appendix
41
Front panel Display Rear panel Remote Index