40
General
HDMI
Default settings are underlined.
Makes settings for HDMI.
Setting items
Setting details
HDMI Audio Out
Select HDMI audio output
device.
AVR
: Play back through speakers connected to the unit.
TV
: Play back through TV connected to the unit.
If “TV” is selected, only an HDMI audio signal is output from the TV.
Pass Through
Selects how the AV receiver
will pass HDMI signals to
the HDMI output in standby
power mode.
On
: Passes the selected HDMI input through the AV receiver’s HDMI
output when the AV receiver is in standby power mode.
Off
: No HDMI signals are passed through the AV receiver’s HDMI output
in standby power mode.
When this setting is enabled, the “Sleep timer function” (
is turned “Off” and the “Auto Standby” (
disabled.
NOTE
When “Pass Through” is set to “On”, it consumes more standby
power.
If you are not using this unit for an extended period, it is
recommended that you unplug the power cord from the power outlet.
Pass Source
The AV receiver will “pass
through” the sources HDMI
signal when in standby.
Last
: Choose this option to “pass through” the last used HDMI input
video source.
CBL/SAT /
Blu-ray
/
GAME
/
AUX
: Choose one of these HDMI sources
to be passed through when the AV receiver is in standby.
Other
Default settings are underlined.
Make various other settings.
Setting items
Setting details
Auto Standby
When you do not perform
any operation on this unit
with no audio or video input
for a specified time, this
unit automatically enters
the standby mode. Before
it enters the standby mode,
“Auto Standby” is displayed
on the display of this unit
and the menu screen.
2Hours
: The unit goes into standby after 2 hours.
4Hours
: The unit goes into standby after 4 hours.
8Hours
: The unit goes into standby after 8 hours.
Off
: The unit does not go into standby automatically.
Setup Lock
Protect settings from
inadvertent changes.
On
: Turn protection on.
Off
: Turn protection off.
To turn “Off” the “Setup Lock”, follow the
procedure below.
q
Press and hold
SETUP
for at least 3 seconds.
“Setup Lock:
0
On
1
” appears on the display.
w
Use
o
p
to select “Off”, and then press
ENTER
.
ENTER
NOTE
When “Setup Lock” is set to “On”, the settings listed below can no
longer be changed. Also, “Setup Lock!” is displayed if you attempt to
operate related settings.
•
Setup menu operations
•
Levels
•
RESTORER
•
Audio Adjust
etc.
Basic instr
uctions
A
dv
anced instr
uctions
Inf
or
mation
A
dv
anced instr
uctions
DVD
