Denon AVR-X1700H, Руководство пользователя

Страница: 239 / 300

Audyssey MultEQ ® XT, Audyssey Dynamic EQ ® and Audyssey Dynamic Volume ® cannot be selected.
0
These cannot be selected when you have not performed Audyssey ® Setup. (
v
p. 188)
0
Switch to a sound mode other than “Direct”. (
v
p. 132)
0
These cannot be selected when sound mode is “DTS Virtual:X” or sound mode that have “+Virtual:X” in the sound mode name.
0
These cannot be selected when using the headphones.
“Restorer” cannot be selected.
0
Check that an analog signal or PCM signal (Sample Rate = 44.1/48 kHz) is input. For playback of multichannel signals such as Dolby Digital or DTS
surround, “Restorer” cannot be used. (
v
p. 168)
0
Switch to a sound mode other than “Direct”. (
v
p. 132)
No sound is output when using ZONE2.
0
Digital signal audio input from the HDMI connector or digital audio connectors (OPTICAL) cannot be played back. Use analog connections.
0
When listening to audio from a Bluetooth device in ZONE2, remove any obstructions between the Bluetooth device and this unit and use it within a
range of about 30 m.
Contents Connections Playback Settings Tips Appendix
239
Front panel Display Rear panel Remote Index