Denon AVR-S730H, Руководство пользователя

Страница: 189 / 264

ZONE2 Setup
Makes settings for audio playback with ZONE2.
0
Values set for “Volume Limit” and “Pow.On Volume” are displayed according to the
setting specified for the volume “Scale”. (
v
p. 140)
0
This can be set when “Assign Mode” is set to “ZONE2”. (
v
p. 170)
o
Volume Level
Set the volume output level.
Variable
(Default) :
Volume can be adjusted.
1 – 98
(–79 dB – 18 dB):
Volume is fixed at the desired level. The
volume cannot be adjusting using the
remote control unit.
0
The dB value is displayed when the “Scale” setting is “ –79.5 dB – 18.0 dB”.
(
v
p. 140)
o
Volume Limit
Make a setting for maximum volume.
60 (-20 dB) / 70 (-10 dB) / 80 (0 dB)
(Default : 70 (-10 dB))
Off: Do not set a maximum volume.
0
This can be set when “Volume Level” is set to “Variable”. (
v
p. 189)
0
The dB value is displayed when the “Scale” setting is “ –79.5 dB – 18.0 dB”.
( v p. 140)
o
Pow.On Volume
Define the volume setting that is active when the power is turned on.
Last
(Default) :
Use the memorized setting from the last
session.
Mute: Always mute when power is turned on.
1 – 98
(–79 dB – 18 dB):
The volume is adjusted to the set level.
0
This can be set when “Volume Level” is set to “Variable”. (
v
p. 189)
0
The dB value is displayed when the “Scale” setting is “ –79.5 dB – 18.0 dB”.
( v p. 140)
Contents Connections Playback Settings Tips Appendix
189
Front panel Display Rear panel Remote Index