background image

About HDMI

HDMI is an abbreviation of High-Definition Multimedia Interface, which is

an AV digital interface that can be connected to a TV or amplifier.
With the HDMI connection, high definition video and high quality audio

formats adopted by Blu-ray Disc players (Dolby Digital Plus, Dolby

TrueHD, DTS-HD, DTS-HD Master Audio) can be transmitted, which is not

possible with the analog video transmission.
Furthermore, in the HDMI connection, audio and video signals can be

transmitted through a single HDMI cable, while in conventional

connections it is necessary to provide audio and video cables separately

for connection between devices. This allows you to simplify the wiring

configuration that tends to be quite complex in a home theater system.
This unit supports the following HDMI functions.

0

Deep Color

An imaging technology supported by HDMI. Unlike RGB or YCbCr,

which uses 8 bits (256 shades) per color, it can use 10 bits (1024

shades), 12 bits (4096 shades), or 16 bits (65536 shades) to produce

colors in higher definition.
Both devices linked via HDMI must support Deep Color.

0

x.v.Color

This function lets HDTVs display colors more accurately. It enables

display with natural, vivid colors.
“x.v.Color” is trademark of Sony Corporation.

0

3D

This unit supports input and output of 3D (3 dimensional) video signals

of HDMI. To play back 3D video, you need a TV and player that

provide support for the HDMI 3D function and a pair of 3D glasses.

0

4K

This unit supports input and output of 4K (3840 x 2160 pixels) video

signals of HDMI.

0

Content Type

It automatically makes settings suitable for the video output type

(content information).

0

Adobe RGB color, Adobe YCC601 color

The color space defined by Adobe Systems Inc. Because it is a wider

color space than RGB, it can produce more vivid and natural images.

0

sYCC601 color

Each of these color spaces defines a palette of available colors that is

larger than the traditional RGB color model.

0

HDMI Pass Through

Even when the power to this unit is set to standby, signals input from

the HDMI input connector are output to a TV or other device that is

connected to the HDMI output connector.

Contents

Connections

Playback

Settings

Tips

Appendix

Appendix

113

Front panel

Display

Rear panel

Remote

Index

Содержание AVR-S530BT








































































































































Отзывы: